Filter
Top Products
23 SYSTEM CONFIGURATION
System Configuration
Additional Input Adjustments
After one input has been adjusted for surround
mode, digital input (if any), speaker type, and
output levels, go back to the INPUT
SETUP line on the MASTER MENU and
enter the settings for each input that you will
use. In most cases, only the digital input and
surround mode will be different from one input
to the next, while the speaker type, crossover
frequency, night mode and output level settings
will usually be the same and may be quickly
entered by entering the same data used for the
original input.
Once the settings outlined on the previous
pages have been made, the AVR 210 is ready
for operation.While there are some additional
settings to be made, these are best done after
you have had an opportunity to listen to a vari-
ety of sources and different kinds of program
material. These advanced settings are described
on pages 31 and 32 of this manual. In addi-
tion, any of the settings made in the initial con-
figuration of the unit may be changed at any
time. As you add new or different sources or
speakers, or if you wish to change a setting to
better reflect your listening taste, simply follow
the instructions for changing the settings for
that parameter as shown in this section.
Having completed the setup and configuration
process for your AVR 210, you are about
to experience the finest in music and home-
theater listening. Enjoy!