Filter
Top Products
PERFORMANCE SPECIFICATIONS
– ii –
9505
Power Rating: FTC (20Hz-20kHz, <0.2% THD)
250 wpc into 8Ω
375 wpc into 4Ω
750 w into 8Ω (bridged mono)
Distortion: <0.1% THD, typically 0.005% THD 1kHz at rated power into 8Ω
Signal-to-Noise Ratio: 100dB below rated output from 20Hz-20kHz “A” Weighted
Frequency Response: 20Hz-20kHz, ±0.1dB
Bandwidth: 0.15Hz-300kHz, +0/–3dB
Slew Rate: 150 V/µs
CMRR: >75dB at 1kHz
Input Impedance: 47,000Ω per phase balanced
Input Sensitivity Range: 800mV (@ 8Ω) per phase balanced
690mV (@ 4Ω) per phase balanced
In/Out Gain: +29dB maximum
Damping Factor: 1000 (to 1kHz); 100 (to 10kHz); 20 (to 100kHz)
Power Consumption: 160W / 2A @ 120VAC (Idle Power)
(Both Channels Driven) 370W / 4.2A @ 120 VAC (1/8 Power – 8Ω)
840W / 8.8A @ 120 VAC (Max. Power – 8Ω)
Controls & Switches: Front Panel Power Switch
Indicators: Line Power LED
Connectors: XLR & 1/4" combo input
Gold-plated RCA input
5-way Binding Post output
IEC Standard Line input
Dimensions: 19"W x 12-1/2"D* x 5-1⁄4"H (3-rack spaces)
(48.26cm x 31.75cm x 13.34cm)
*plus 1" (2.54cm) for handles
Net Weight: 50 lbs. (22.68kg)
19.00
1.19
12.05
16.94
5.20
®
Series 9505
Power amplifier
True-balanced JFET input