Filter
Top Products
18
TUNER MODE
________________________________________________________________
Selecting the Tuner as the source
1 Select the input source using the »TUNER BAND« button.
– Display: the radio station last selected.
Selecting a preset station
1 Select the frequency band (FM or MW) by pressing the »TUNER BAND«
button.
2 Select the preset position by pressing the »NEXT PRESET« button on the
device.
– Display: briefly the preset position, then »FM 87.50« or the name of the
station.
or
Select the preset position directly using »1...0, +10« on the remote control.
– Display: briefly the preset position, then »FM 87.50« or the name of the
station.
Stereo/mono reception
If the device is receiving an FM stereo programme »ST« appears in the display.
However, if the signal from the FM stereo station is weak, you can improve the
sound quality by switching to mono reception.
1 Press »STEREO/MONO« on the remote control to switch to mono recep-
tion.
– Display: »MONO«.
2 To switch back to FM stereo press »STEREO/MONO« on the remote control.
– Display: »ST«.
M
FLAT
ST
MHz
F875.0
M
FLAT
MONO
MHz
F892.0
M
FLAT
ST
F0P2