Filter
Top Products
ENGLISH
15
SETTINGS
____________________________________________________________________________________
... using a manual search
1 Press »TUNER« to switch on the device.
– Display: the waveband (»
FM
« or »
MW
«) and the frequency.
2 Select the frequency band (FM or MW) by pressing the »TUNER BAND«
button.
3 Press »
5a
ľľ
« or »
ıı
s6
« to tune to the required station. Hold down
»
5a
ľľ
« or »
ıı
s6
« to start a search for the next radio station, or
briefly press »
5a
ľľ
« or »
ıı
s6
« to change the frequency in small
steps.
4 Tune to the station you want and then briefly press »PROGRAM AUTO
PRESET« on the remote control.
Display: »MEMORY« flashes along with the frequency of the station.
5 Select the preset position using »1...0, +10« on the remote control.
6 Press »PROGRAM AUTO PRESET« on the remote control to store the
station.
Display: the waveband and the frequency, followed by the station name.
7 To store more stations repeat steps 3 to 6.
Note:
If a station transmits RDS information, the stereo system will store its name.
– Display: for example »
FM 95.70
«, followed by the station name.
Deleting settings
This function enables you to delete all the stored settings.
1 With the device on, press the »RESET« button on the bottom of the device
using an implement such as a paper clip.
A
FLAT
ST
RDS
FNTA YS
M
FLAT
ST
MHz
F875.0
M
FLAT
ST
MHz
F965.0
M
FLAT
ST MEMORY
MHz
F875.0