Filter
Top Products
ENGLISH
23
Creating a track memory
You can create a track memory of up to 64 files on different albums (MP3) or up to 64 tracks
(CD-DA) for the current CD in any order you choose and then play them back in that
sequence. A file or track may be stored more than once. Programming is only possible in stop
mode.
Selecting and storing files (MP3 only)
1 Press »PROGRAM« to call up the function.
– Display: »P-0 I «, the file display »000« and »PROGRAM«, the album display »00«
flash.
2 Select the desired album with »
5a
« or »
s6
« and confirm with »PROGRAM«.
– Display: the file display »000« flashes.
3 Select the desired file with »
5a
« or »
s6
« and save with »PROGRAM«.
– Display: »P-0 2 «, the file display »000« and the album display »00« flash.
4 To store more tracks, repeat steps 2 to 3.
Selecting and saving tracks (CD-DA only)
1 Press »PROGRAM« to call up the function.
– Display: »P-0 I «, the track display »00« and »PROGRAM«.
2 Select the desired track with »
5a
« or »
s6
« and save with »PROGRAM«.
– Display: »P-0 2 « and the track display »00«.
3 To store more tracks, repeat step 2.
Playing back a track memory
1 Start the track memory by pressing »
ı
II«.
– Display: »PROGRAM«.
– Playback begins with the first programmed track.
2 Press »STOP
7
« to end playback.
3 To play the track memory again, press »PROGRAM« and afterwards »
ı
II«.
Checking the track memory
1 Press »PROGRAM« repeatedly when the in stop mode.
– The sequence of the stored files or tracks is displayed.
Deleting the track memory
1 In track memory mode, press »
7
«;
or
open the CD compartment with »OPEN/CLOSE« on the device.
CD MODE ________________________________________________________