Filter
Top Products
16
Setting the time
After the first time the hi-fi system is connected to the mains, it switches to stand-by. The time
appears in the display.
1 In stand-by mode, press »PROGRAM« and hold it down until the display flashes in
24 hour format.
2 Set the desired format (24 or 12 hour clock) with »
5a« or »s6« and confirm with
»PROGRAM«.
– Display: the hours flash.
3 Set the hours with »
5a« or »s6« and confirm with »PROGRAM«.
– Display: the minutes flash.
4 Set the minutes with »
5a« or »s6« and confirm with »PROGRAM«.
– Display: the current time.
Note:
The current time is displayed in stand-by mode.
Setting and storing radio stations
You can store up to 30 stations in the FM (VHF) frequency band and up to 10 stations in the
MW (medium wave) frequency band on preset channel positions.
1 Press »FUNCTION« to select TUNER as the input source.
2 Press »BAND« to select the frequency band (FM or MW).
3 Set the desired radio station by briefly pressing »
5a« or »s6« repeatedly.
– Display: the frequency changes in steps of 50 kHz
or
press »5a« or »s6« and hold down until the frequency changes to the fast search.
– The search stops when a radio station is found with a sufficiently strong signal.
4 Call up the store function with »PROGRAM«.
– Display: »MEMORY«, the preset position »01« flashes.
5 Select the desired preset position (FM: 01-30, MW: 01-10) with »– DIR/PRESET
+
«.
6 To store the radio station, press »PROGRAM«.
– Display: the preset position, the wave band and the frequency.
7 To store more radio stations, repeat steps 3 to 6.
SETTINGS_________________________________________________________