Filter
Top Products
ENGLISH
20
TIMER MODE
--------------------------------------------------------------------------------------------------------------------------
Your hi-fi system has two timer modes:
– The timer, which switches the hi-fi system
on at the set time, wakes you with the input
source you selected and then switches off.
– The sleep timer, which switches the hi-fi sys-
tem off at a preset time.
Notes
7
The settings for the Timer mode can only
operated with the buttons on the remote
control.
7
The time must be set on the hi-fi system.
7
When this setting is being made, if no button
is pushed for more than 10 seconds, the hifi
system will end the process automatically.
You then have to start again.
Timer
Setting the timer
1 In standby mode, press and hold »TIMER SET«
on the remote control.
– Display: »ON TIME« appears, then the clock
digits for the hours flash.
2 Setting the switch on time, press »5« or »6« to
set the hours sand confirm with »TIMER SET«.
Press »5« or »6« to set the minutes and con-
firm with »TIMER SET«.
– Display: »OFF TIME« appears, then the clock
digits for the hours flash.
3 Setting the switch off time, press »5« or »6« to
set the hours and confirm with »TIMER SET«.
Press »5« or »6« to set the minutes and con-
firm with »TIMER SET«.
– Display: the source appears.
4 Select the desired sound source (TUNER, CD,
USB or SD) with »5« or »6«.
Confirm your desired mode with »TIMER SET«.
– Display: the volume appears.
Note:
7
If CD/USB/SD source is selected and
there is an error, TUNER will be selected
automatically.
5 Select the desired volume with »5« or »6«.
Confirm with »TIMER SET«.
– Display: » «.
– The timer is now set and activated.
Activating and deactivating the
timer
1 In standby or during playback, press
»TIMER ON/OFF« on the remote control
once.
– Display shows » « if activated, and disap-
pears if deactivated.
Sleep Timer
Setting the sleep timer
1 Switch on the hi-fi system from standby by
pressing »8«.
2 Open the function with »SLEEP«.
– Display: »SLP 90« and »SLEEP« appears.
3 Set the switch-off time (»90«, »80« till »10«,
»OFF«) by pressing »SLEEP«.
– Display: briefly, for example »SLP 30«, then
the selected input source and »SLEEP«.
– The hi-fi system switches off after the selected
time has elapsed.
Ending the sleep timer prematurely
1 To switch off the sleep timer prematurely, keep
pressing »SLEEP« on the remote control until
»OFF« appears and »SLEEP« disappears in the
display;
or
switch the hi-fi system to standby mode by
pressing »8«.