Filter
Top Products
ENGLISH
12
Switching on and off
The only way to disconnect the hi-fi system from
the mains supply is to pull out the plug from the
wall socket.
1 Switch on the hi-fi system from standby mode
by pressing »8« or »SOURCE« on the hi-fi sys-
tem.
– The system switches to the last selected
source.
Note
7
If you use the remote control, you can press
»8« or one of the buttons »CD«, »USB«,
»SD«, »TUNER«, »CASS« or »AUX«.
2 Switch the hi-fi system to standby mode by
pressing »8«.
– Display: the current time.
Automatic shutdown
If the device is in the “Stop“ position or on socket
»AUX In« is no audio signal available, the de-
vice switches automatically to Stand-by mode
after 15 minutes. For further using switch on the
device again.
Selecting the input source
1 Select the input source (TUNER, CD, USB,
SD, CASS, AUX ) with »SOURCE« on the
hi-fi system; or by using the remote control,
press one of the buttons »CD«, »USB«, »SD«,
»TUNER«, »CASS« or »AUX«.
– Display: » CD«, » USB«, » CARD«
» 100.60« (frequency of the radio sta-
tion), » CASS« or »
AUX«.
Adjusting the volume
1 Adjust the volume with »+ VOLUME -« on
the hi-fi system; or »+« and »–« on the remote
control.
– Display: briefly »VOL« from »0« to »31« then
»MAX«.
GENERAL FUNCTIONS
---------------------------------------------------------------------------------------
Selecting sound settings
You can choose between the preset sound set-
tings FLAT, CLASSIC, ROCK, POP and JAZZ.
1 Select the sound setting using »EQ« on the re-
mote control.
– Display: »FLAT«, »CLASSIC«, »ROCK«,
»POP« or »JAZZ«.
Switching the Ultra Bass System
on and off
1 Switch the Ultra Bass System on and off by
pressing »UBS« on the remote control or hi-fi
system.
– Display: » «, if the UBS is activated, disap-
pears if function is deactivated.
Muting
You can switch the hi-fi speakers to and from
mute mode with this function.
1 Activate mute with » « on the remote control.
– Display: »MUTING«.
2 Deactivate mute with » « on the remote con-
trol.
– Display: »MUTING« disappears.
Displaying the time
1 Display the time by pressing »DISPLAY«.
2 Press »DISPLAY« again to switch off the time.