Filter
Top Products
50
Registering the device with the WLAN router
with individual settings in the network
These settings require advanced knowledge of the configuration of
networks.
1 Press »MENU« to open the menu of the current source.
2 Press »
Λ
« or »
V
« to select the »Main menu« option and press
»
OK« to confirm.
3 Press »
Λ
« or »
V
« to select the »System setup« option and press
»
OK« to confirm.
4 Press »
Λ
« or »
V
« to select the »Network setup« option and press
»
OK« to confirm.
5 Press »
Λ
« or »
V
« to select the »Manual settings« option and
press »
OK« to confirm.
6 Press »
Λ
« or »
V
« to select option »Wireless« or »Wired« and
press »
OK« to confirm.
7 Press »
Λ
« or »
V
« to select the »DHCP disable« option and
press »
OK« to confirm.
– You are prompted to enter the IP address(es).
Note:
Setting »DHCP disable« means you have to enter all addresses
manually. If »DHCP enable« is set, the addresses are automati-
cally assigned by the router. If you have selected »DHCP en-
able«, continue with step
12.
8 Use »
Λ
« or »
V
« to enter the IP address and press »OK«to
confirm.
– You are prompted to enter the subnet mask.
Notes:
Use »» « to move to the next position.
The settings in steps
9 to 11 can be found in the router configu-
ration.
9 Use »
Λ
« or »
V
« to enter the subnet mask and press »OK«to
confirm.
– You are prompted to enter the gateway address.
Note:
The device uses the gateway address to access the network.
10 Use »
Λ
« or »
V
« to enter the gateway address and press
»
OK« to confirm.
– You are prompted to enter the primary DNS.
Note:
The primary and secondary DNS (Domain Name System) are
the network address of the server made available by the provider.
V
SPECIAL SETTINGS
------------------------------------------------------------------
Network setup
Time setup
Sleep
Alarms
›
Wizard
PC settings
View settings
Manual settings
›
DHCP enable
DHCP disable
›
Ethernet
IP address
193.169.99.220
Ethernet
Subnet mask
255.255.255.0
Ethernet
Gateway address
193.168.99.1