Filter
Top Products
ENGLISH
25
SETTINGS
----------------------------------------------------------------------------------------------------
Searching for and saving FM stations
Setting the search mode
There are two different automatic station search modes.
1 Press » « to open the FM menu.
2 Press »
Λ
« or »
V
« to select the »Scan setting« option and press
»
OK« to confirm.
– Display: e.g. »All stations«.
3 Select your setting (»Stereo stations only« or »All stations«) using
»
Λ
« or »
V
« and press »OK« to confirm.
Automatic station search
1 Press and hold »
Λ
« or »
V
«. When you release the button, the au-
tomatic search stops at the next station.
– If RDS information is transmitted by the broadcaster, then the
device saves the station name. If station and title information is
transmitted, it will appear as ticker text after a short time.
Tuning stations manually
1 Move the frequency forward in brief steps by repeatedly press-
ing »
Λ
« or »
V
«.
– The frequency goes up or down in 50 kHz steps.
Saving FM radio stations on presets
You can use the remote control to fill 10 presets with the FM radio
stations of your choice. If you assign the presets again, the previously
saved stations are overwritten. You can also assign presets 1 - 5 on
the device.
1 Search for the FM station as described.
2 To save stations, keep pressing the number button » « until
»Preset 2 Saved«, for example, appears in the display.
3 To store more stations, repeat steps 1 and 2 as many times as
necessary.
Scan setting
Audio setting
Main menu
›
Stereo stations only
All stations
›
ANTENNA St
100.60 MHz
[No RadioText]
Preset 2 Saved