Filter
Top Products
12
Connecting the power cord
Note:
Check that the mains voltage on the type plate (on the back of
the device) corresponds to your local mains supply. If this is not
the case, contact your specialist dealer.
1 Plug the power cord into the wall socket.
Caution:
The device is connected to the mains with the power cord. Pull out
the power plug when you want to completely disconnect the
device from the mains.
Unplug the mains plug to disconnect the device from the mains.
Make sure the power plug is easily accessible during operation
and not hindered by other objects.
Connecting an MP3 player or a USB memory
stick
Note:
The device is ready for connection to an MP3 player or USB
memory stick. The device is only able to play MP3 data formats
after a software update. The software update is available on
www.grundig.com.
Important:
The device must be switched off while the USB connection is
being made. If it is not switched off, data can be lost.
1 Connect the USB interface of the MP3 player to the »USB«
(type A) socket on the device using a standard USB cable
or
Insert the USB plug of the USB memory stick in the USB socket
»USB« (type A) on the device.
Connecting an external device
Note:
Switch the device off before you connect external devices.
1 Use standard audio cables to connect the audio outputs of the
external device to the »
AUX IN« socket on the device.
CONNECTION AND PREPARATION
----
12