Filter
Top Products
5
An appliance and cart combination should be moved with care. Quick stops, excessive
force and uneven surfaces may cause the appliance and cart combination to
overturn.
The lightning flash with arrow head symbol, within an equilateral triangle,is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT'S AC ADAPTER TO
RAIN OR MOISTURE. DO NOT OPEN THE CABINET, REFER
SERVICING TO QUALIFIED PERSONNEL ONLY
CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THE
AC ADAPTER WITH AN EXTENSION CORD RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES OF THE AC ADAPTER CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION: POUR PREVENIR LES CHOCS ELECTRIQUES,
NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE
SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE
INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A
DECOUVERT.
1. Read Instructions-All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions-The safety and operating
instructions should be retained for future reference.
3. Heed Warnings-All warnings on the appliance should
be adhered to.
4. Follow Instructions-All operating and use instructions
should be followed.
5. Cleaning-Unplug this appliance from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleansers.
Use a damp cloth for cleaning.
6. Attachments-Do not use attachments that are not
recommended by the manufacturer or they may cause
hazards.
7. Water and Moisture-Do not use this product near
water-for example, near a bathtub, wash bowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool-
and the like.
8. Accessories-Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the
appliance.
9. Ventilation-This product should never be placed near
or over a radiator or heat register. This product should not be
placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's
instructions have been adhered to. Any slots or openings in
the,cabinet are provided for ventilation. To ensure reliable
operation of the product and to protect it from overheating,
these openings must not be blocked or covered. The
openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. KEEP CURTAINS
AND OTHER FLAMMABLE MATERIALS OUT OF DIRECT
CONTACT WITH THE AC ADAPTER.
WARNING. TO PREVENT FIRE OR
ELECTRICAL SHOCK DO NOT EXPOSE
THIS PRODUCT'S AC ADAPTER TO RAIN OR MOISTURE
10. Power Sources-This product should be operated only
from the type of power source indicated on the marking label of
the supplied AC Adapter. If you are not sure of the type of power
supplied to your home, consult your appliance dealer or local
power company.
11. Lightning-For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of
time, unplug the AC adapter from the wall outlet.
12. Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines, other electric light or
power circuits, where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or
circuits as contact with them may be fatal.
13. Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
14. Servicing-Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
personnel.
15. Damage Requiring Service-Unplug this product from the wall
outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the AC adapter cord or plug is damaged.
b. If the AC adapter has been exposed to rain or water.
c. It the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions. An improper adjustment may result in damage and will often require
extensive work by a qualified technician to restore the product to its normal
operation.
d. If the product has been dropped or the cabinet has been
damaged.
e. When the product exhibits a distinct change in performance-this
indicates a need for service.
16. Replacement Parts-When replacement parts are required, be
sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original parts. Unauthorized substitutes may result in fire,
electric shock or other hazards.
17. Safety Check-Upon completion of any service or repairs
to this product, ask the service technician to perform safety checks
to determine that the product is in proper operating condition.
18. Outdoor Antenna Grounding-Before attempting to install
this product, be sure the antenna or cable system is grounded so as
to provide some protection against voltage surges and built-up
static charges.
a. Use No.10 AWG (5.3mm
2
) copper, No.8 AWG (8.4mm
2
)
aluminum, No.17 AWG (1.Omm
2
) copper-clad steel or bronze
wire or larger, as ground wire.
b. Secure antenna lead-in and ground wires to house with
stand-off insulators spaced from 4 feet (1.22m) to 6 feet (1.83m)
apart.
c. Mount antenna discharge unit as close as possible to where
lead-in enters house.
d. A driven rod may be used as the grounding electrode where
othertypes of electrode systems do not exist. Refer to the National
Electrical Code, ANSI/NFPA 70-1990 for information.
e. Use jumper wire not smaller than No.6 AWG 13.3mm
2
)
copper or equivalent, when a separate antenna grounding
electrode is used.
EXAMPLE OF ANTENNA GROUNDING