Grundig YB500 Stereo System User Manual


 
26
The alarm mode or must be selected.
Enter the desired switch-on time.
As the alarm signal has a fixed duration of 5 minutes, it is not
necessary to enter the OFF time.
Press the AUTO button. If the radio is switched off, the
following indications an visible in the display:
TIME I or TIME II
Clock time
Alarm mode
and/or
Switch-on time
- At the programmed time, the alarm signal will sound for 5
minutes max.
- You can enter a switch-off time of your choice with the numeric
buttons and the TIME I/II button. However, this does not apply for
the "wake-up by sound
signal" function.
Use the TUNE A button to select the menu function ON 2.
Press the CLEAR button to quit the menu (the entered data will be
stored in memory).
For ON 2/OFF 2 applies the same as for ON 1 /OFF 1.
Checking the Switching Times 1 /2
When you have selected the menu functions ON 1 or ON 2 and
OFF 1 or OFF 2, you can indicate in the display the switch-on
time, the station memory location, the alarm (wake-up) mode,
and the switch-off time by pressing the TUNE A/V button.
Automatic Switching On and Off
- The AUTO button allows you to switch on and off the automatic
functions.
1. With radio programme
The alarm mode or must be selected.
Enter the desired switching times.
Tune to the desired station or select the desired station memory
location and adjust the appropriate volume.
Press the AUTO button to enable the automatic function.
- The radio is switched off if the current time does not lie within
the programmed automatic time period.
- The following indications are then visible in the display: TIME I or
TIME II
Clock time
Alarm mode
and/or
Switch-on time
If you have selected no alarm mode, a hint with the error
message L TIMER will appear when pressing the AUTO button.
It is of course possible to switch the radio on and off with the
ON/OFF button so that you can listen to the radio also at times
which are not lying within the automatic switching period.
If 2 switching times are programmed, the display will indicate the
next switch-on time.
- At the programmed times, the radio will automatically be switched
on and off.
Prematurely switching off the radio:
• Press the ON / OF F button.
- The entered switching times are retained.
2. With alarm sound signal