Filter
Top Products
16
Tuning to Stations with the TUNE A/V buttons
• Switch the unit on with the ON /OFF button (11) .
- The frequency tuned to appears in the display, on FM in
MHz, on AM in kHz.
- A separate tuning memory is provided for each waveband.
1. Frequency Tuning in the FM Band
• Select the FM waveband.
- You hear the station last received in the FM band.
• You tune to the desired station by briefly pressing one of the
buttons TUNE △ or TUNE ▽ (19). Each pressure on the
button changes the tuning frequency by 25 kHz.
• A longer pressure on one of the buttons TUNE △ or TUNE
▽ (19) starts the automatic station search.
TUNE ▽ =the search is started in direction of lower
frequencies.
TUNE △ =the search is started in direction of higher
frequencies.
- The station search operates in the 100 kHz mode.
- The display (4) indicates AS (Auto-Search) = automatic
station search.
The automatic station search will stop as soon as it has found
a station appropriate for good reception. It then can be
restarted by a longer pressure on one of the TUNE /△▽
buttons.
If the found station is an RDS station, the RDS symbol and the
station name (see "Special Functions on FM") will be displayed
after a few moments. In addition, the display (4) indicates O
for the tuning memory, and you will hear the station.