Filter
Top Products
19
Storing in Memory General
What can You Store?
You can programme up to 40 station memory locations in
random order, also mixed from the 4 wavebands FM - MW -LW-
SW.
You can store in memory each frequency you have tuned to.
The associated operating states (mono/stereo, LSB/USB) are
automatically stored with the frequency.
On each station memory position, you can store in addition - even at
a later date - an alphanumeric abbreviation (e.g., station name) of
up to 8 positions.
With FM-RDS stations, the station name is automatically displayed
and transferred into the respective station memory location when
storing the station.
Is the Frequency Tuned to Already
Stored in Memory?
Store Compare
• Before storing a frequency tuned to in memory, you can check
whether this frequency is already stored, by briefly pressing the
STORE button.
- If the station is already stored in memory, the display indicates the
station number (e.g., ＊ MEMO 12). If you press the STORE
button once again or keep it pressed while this indication is
visible, all further stations with this frequency will be indicated.
- If the station is not yet stored in memory, the indication ＊ NEW
appears in the display.
• A long pressure on the STORE button will indicate the free
memory positions (e.g. ＊ FREE 9). If you press the STORE
button once again or keep it pressed while this indication is
visible, all free memory locations will be indicated.
- If all locations of the station memory are occupied, the indication
＊ FULL will appear in the display.