Filter
Top Products
27
Advanced operations
7For MP3/WMA: During playback or while stopped
7For JPEG/ASF/MPEG-2/MPEG-1/DivX: While stopped
1 Press Cursor 3/2/Y/5 to select
the desired group/track/file.
• For MP3/WMA, playback starts from the selected
track.
• For JPEG, proceed to perform the following
operation.
2 Press play button for
corresponding source (DVD 3 or
USB MEMORY 3) or ENTER.
• Track playback/slide-show starts from the selected
track/file.
• When you press ENTER for JPEG, only the selected
file is played back.
To skip the file during playback
Press x/4 or Cursor 5/Y.
NOTE
• You can also check playback information on the display
window. (See page 18.)
• Some group, track and file names may not be displayed
correctly depending on recording conditions.
• The order of groups, tracks, and files may be displayed
differently from the order displayed on your personal
computer.
When Resume Playback is set to “ON” (see
page 35) and you stop playback by the
following operations, the position where
playback has been stopped is stored.
(RESUME indicator lights on the display
window.)
• Turning off the power (see page 14)
• Pressing 7 once
• Changing the source (see page 15)
To start playback from the stored position
• Press play button for corresponding source (DVD 3 or
USB MEMORY 3) on the remote control or 3 (play
button) on the center unit.
• Select DVD or USB MEMORY as the source again if you
changed the source.
To clear the stored position
Press 7 again.
• Opening the disc tray or disconnecting the USB mass
storage class device also clears the stored position.
NOTE
• (For DivX) The beginning of a scene where playback has
been stopped may be stored.
7During playback of a disc containing multi-view
angles
When using the ANGLE button:
1 Press ANGLE with SHIFT pressed.
Example: The first view angle is selected out of 3 view
angles recorded.
.
2 Press ANGLE repeatedly with
SHIFT pressed, or Cursor Y/5 to
select the desired view angle.
When using the on-screen bar:
1 Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2 Press Cursor 3/2 to highlight
.
3 Press ENTER.
4 Press Cursor Y/5 to select the
desired view angle.
5 Press ENTER.
6 Press ON SCREEN.
The on-screen bar disappears.
Resume Playback
Selecting a view angle
See page 21 for button locations.
EN_THP7-P3[U]4.book Page 27 Tuesday, April 4, 2006 5:08 PM