Filter
Top Products
57
Listening to the radio
www.gateway.com
Listening to the radio
Selecting the tuner
To select the tuner:
1 Press the INPUT SELECTOR button on the receiver or the TUNER button on
the remote control to select the tuner.
2 Press the AM/FM MODE button on the receiver to cycle between the
following bands:
FM STEREO, FM MONO, and AM.
When FM stereo broadcasts are poor because of weak broadcast signals, select
the FM mono mode to reduce the noise. The FM broadcasts are reduced to
monaural sound.
Manual tuning
To manually tune the tuner:
1 If you are using the buttons on the receiver, repeatedly press the TUNE
MODE
button on the receiver to select Tuning mode. The PRESET light turns
off.
- OR -
If you are using your remote control, go to the next step.
2 Repeatedly press the up and down TUNING/PRESET buttons on the receiver
or the – and +
TUNE buttons on the remote control until the frequency you
want is set.