Filter
Top Products
Manual Fusion Intelpage IP
© CommtechWireless Page 47
b. The default BASEPage TAP gateway settings will work fine. The telephone number
simply needs to be entered into the “Phone” field.
c. Any other settings can be changed as required.
4.5 Setting up Email Paging
The networking administrator will normally set this up. Below is an explanation of the
configuration process.
1. Login into the Exchange Server machine and run the System Manager program from
the Start Menu.
2. The window below will be shown. Click the Routing Groups folder. Then double
click First Routing Group.
3. Now double click Connectors. Right click on the Connectors folder and select New ->
SMTP Connector. A new window will be shown as seen below.
NOTE: You will need to fill out the fields differently to those shown below as your units IP
address and network domain names will be different to those shown.
4. The information in the Address field shown below must match that of the Email
Domain field described in the user interface.