Filter
Top Products
8 Mounting the Fresco i On A Wall or Ceiling
Required hardware (included):
(6) M4 screws
Required tools (included):
2.5mm Allen tool
1 Prepare a flat surface with padding and sheets to
protect the speaker as you work on it. Remove the
Fresco i's grill cloth and carefully place the Fresco i
face down on the work surface.
2 Using the 6mm Allen tool, loosen the 2 cap nuts (see
figure 12).
3 Rotate/open the wall bracket away from the cabinet
bracket (see figure 13).
4 Align the 6 holes in the Fresco i's wall mounting
bracket with the holes on the back of the Fresco i's
cabinet. Please note that the wall bracket should lie
flat against the Fresco i cabinet with the hinges along
the flat, straight edge of the cabinet (see figure 14).
5 Using the 2.5MM Allen tool, install the 6 screws that
attach the cabinet bracket and firmly tighten them (see
figure 15).
Installing the Bracket Assembly
Figure 12. Loose the 2 cap nuts.
Figure 13. Rotate/open the wall bracket away from the cabinet bracket.
Figure 14. Align the 6 holes on the mounting bracket with those of the Fresco
Figure 15. Install 6 screws.