Filter
Top Products
NOTE: MartinLogan recommends using 5 wall anchors
to secure each Fresco i to a wall. During the installation,
if any of the screw/wall anchor positions are over a stud,
it is recommended to screw directly into the stud.
NOTE: To assure that your Fresco i is safely wall
mounted, these instructions must be carefully followed.
Study them thoroughly before installing your Fresco i's.
NOTE: The following instructions assume the mounting
surface is standard wood frame and standard sheet rock
construction. If you wish to mount the Fresco i to another
type of material, you should consult a bonded contractor.
WARNING! Although installing the Fresco i on a
wall requires 1 person, an assistant will be helpful.
The bracket assembly shipped with the Fresco i
loudspeaker is designed for use only with the
Fresco i. Use with other appliances may result in
instability causing possible injury. To prevent injury,
this apparatus must be securely attached to the
wall in accordance with the installation instructions.
Which Way Should It Rotate?
The bracket assembly supplied with the Fresco i allows the
speaker to mount flat against a wall and pivot up to 90°.
Depending on the installation locations, the Fresco i
on-wall bracket will need to be modified to allow either
counter-clockwise/up or clockwise/down rotation (see
figure 3 and 4). The configuration of Fresco i’s bracket
assembly is identical for counter-clockwise and up
rotation and is identical for clockwise and down rotation.
Mounting the Fresco i On A Wall or Ceiling 5
MOUNTING THE FRESCO I ON A WALL OR CEILING
Figure 3. Vertical Installation. Rotation direction for various installation
Figure 2. The parts of the Fresco i bracket assembly.
Figure 4. Horizontal Installation. Rotation direction for various installation