Filter
Top Products
System Frequency Response
75–20,000 Hz ± 3 dB
Sensitivity
90 dB/2.83 volts/meter
Impedance
5 ohms
Crossover Frequency
500, 3200 Hz
Components
Air core coils, metal film and low dissipation electrolytic
capacitors
Woofer Type
Two 4” (10.2cm) high rigidity aluminum cone with
extended throw drive assembly, non-resonance
asymmetrical chamber format; bass reflex; unshielded
ATF Mid-Range Driver
1.5" x 6" (3.8cm x 15.2cm) ATF Transducer
ATF High Frequency Driver
1.5" x 2.25" (3.8cm x 5.7cm) ATF Transducer
Power Handling
150 watts rms
Weight
16 lbs. each (7.3 kg)
Size Without Mounting Bracket
24” inches W × 5” inches D × 8.25” inches H
(61cm W × 12.7cm D × 21cm H)
Size With Mounting Bracket Flat Behind Speaker
24” inches W × 5.7” inches D × 8.25” inches H
(61cm W × 14.5cm D × 21cm H)
Your Fresco i speaker is provided with an automatic Limited 90 Day
Warranty coverage.
You have the option, at no additional charge, to receive a Limited
5 Year Warranty coverage. To obtain the Limited 5 Year Warranty
coverage you need to complete and return the Certificate of
Registration, included with your speakers, and provide a copy of your
dealer receipt, to MartinLogan within 30 days of purchase.
For your convenience MartinLogan also offers online warranty registration at
www.martinlogan.com.
MartinLogan may not honor warranty service claims unless we have
a completed Warranty Registration on file! If you did not receive a
Certificate of Registration with your new Fresco i speaker, you cannot be
assured of having received new units. If this is the case, please contact
your authorized MartinLogan dealer.
Serial Number
Fresco i’s serial number is located near the binding posts. Each unit has
a unique serial number.
Service
In the rare event that your MartinLogan product should require service
please contact the dealer from whom the product was purchased. In
most cases your dealer will be able to assist you in troubleshooting and
resolving the issue. If the dealer is unable resolve the issue or if there
is no local dealer in your area contact MartinLogan customer service
directly by using the service request form at www.martinlogan.com or by
calling 785-749-0133.
Before returning any product to MartinLogan for service first contact the
service department for an RMA number. Incoming shipments will only be
accepted if labeled with a MartinLogan issued RMA number.
Should you be using a MartinLogan product in a country other than the
one in which it was originally purchased, please note the following:
1 The appointed MartinLogan distributor for any given country is
responsible for warranty servicing only on units distributed by or
through it in that country in accordance with its applicable warranty.
2 Should a MartinLogan product require servicing in a country other
than the one in which it was originally purchased the end user
may seek to have repairs performed by the nearest MartinLogan
distributor, subject to that distributor's local servicing policies. All cost
of repairs (parts, labor, transportation) must be borne by the owner
of the MartinLogan product.
3 If, after owning your MartinLogan product for six months, you
relocate to a country other than the one in which it was purchased,
your warranty may be transferable. Contact MartinLogan for details.
General Information 17
GENERAL INFORMATION
Warranty and RegistrationSpecifications