Fortec FS-4000v2 Satellite Radio User Manual


 
Suppose that you have selected Fixed
Antenna in the Antenna Connection window.
1. Satellite: All selected satellites in the
satellite list are displayed in this item.
Press keys to select the satellite in
circle. Or press OK key to pop up the drop-
down list, then select the desired satellite in
the list and press OK key to confirm.
2. LNB Freq, Transponder, DiSEqC1.0,
DiSEqC1.1: The same operation as the
above.
3. 22K, 0/12V, Toneburst, LNB Power: You
can press keys to select in circle.
Part B: Moter
2.3 Antenna Setup
Part A: Fixed
Suppose that you have selected Moter
Antenna in the Antenna Connection window.
1. LNB Type: Select the proper LNB type.
2. Motor Type: Select between DiSEqC1.2
and USALS. If you select DiSEqC1.2, the
following Local Longitude and Local Latitude
items will turn grey.
3. Delete All: Press OK key to pop up the
dialogue "Are you sure to clear set satellite
position of this tuner?". Press OK key at the
Yes button to clear all the memories about
the position of the satellites that has
connected to the current turner.