Filter
Top Products
3. Press red colour key to pop up the Edit
Satellite window. Press PR+, PR- keys to
move cursor up or down.
Name: User numeric keys to change the
name of the satellite, please refer to the Edit
Channel Name.
Longitude: You can press keys to
switch between east longitude and west
longitude. After pressing OK key, you can
use numeric keys to edit the longitude, press
EXIT key or the PR+, PR- keys to exit editing
mode. The range of the longitude is from 1to
180 degree. If beyond this range, system will
inform you "out of range" when you press
yellow colour key on the RCU.
After setting, press yellow colour key to
save and exit, while press blue colour key to
exit without saving.
4. Press green colour key to pop up the Add
Satellite window. Since the same operation
as the above Edit Satellite window, here we
don't explain any more.
5. Press blue colour key to pop up the
dialogue "Are you sure to delete?". Select
Yes button and press OK key to delete the
selected satellite. You can cancel this
operation by pressing OK key at the NO
button.