Filter
Top Products
7
7
f e n d e r . c o m
fender.com
M. POWER CORD SOCKET — Connect to a grounded outlet using the
included power cord in accordance with the voltage and frequency
ratings specified on the rear panel of your amplifier.
N. POWER SWITCH — Switches the amplifier ON–OFF.
O. FUSE — Protects the unit in case of electrical faults. Replace only with
the type and rating specified on the rear panel of your amplifier.
P. SPEAKER OUT — Connection for the internal speaker (Combo unit
only) or an external speaker (/W minimum).
Use only a standard /" mono plug.
Q. LINE OUT — Connection for recording or sound reinforcement
equipment.
Use only a standard /" mono plug.
R. FOOTSWITCH — Connect the optional -button footswitch here
with the supplied cable to enable remote channel selection and
effects bypass. The CHANNEL SELECT {C} button is disabled when the
footswitch is connected.
♫
If you need a longer footswitch cable, use (unshielded) speaker cable
rather than (shielded) guitar cable.
S. USB — Use the USB port to connect the Super Champ® X amplifier to
your computer and stream audio to your favorite recording software.
Also:
• Use Fender® FUSE™ software to control your Super Champ X2
amplifier from your computer and to access bonus amp features not
available from the Super ChampX2 alone.
♫
Please download Fender® FUSE™ software and the owner's manual from
fuse.fender.com.
Rear Panel
Rear Panel
Tube Replacement
Tube Replacement
Specifications
SUPER CHAMP X2 COMBO SUPER CHAMP X2 HEAD
TYPE: PR 2259 PR 2260
PART NUMBERS: 2223000000 (120V, 60Hz) 2223000900 (120V, 60Hz) DS 2223100000 (120V, 60Hz) 2223100900 (120V, 60Hz) DS
2223001900 (110V, 60Hz) TW DS 2223003900 (240V, 50Hz) AUS DS 2223101900 (110V, 60Hz) TW DS 2223103900 (240V, 50Hz) AUS DS
2223004900 (230V, 50Hz) UK DS 2223005900 (220V, 50Hz) ARG DS 2223104900 (230V, 50Hz) UK DS 2223105900 (220V, 50Hz) ARG DS
2223006900 (230V, 50Hz) EUR DS 2223007900 (100V, 50/60Hz) JPN DS 2223106900 (230V, 50Hz) EUR DS 2223107900 (100V, 50/60Hz) JPN DS
2223008900 (220V, 50/60Hz) CN DS 2223009900 (220V, 60Hz) ROK DS 2223108900 (220V, 50/60Hz) CN DS 2223109900 (220V, 60Hz) ROK DS
POWER: REQUIREMENTS: 90W OUTPUT: 15W RMS into 8Ω REQUIREMENTS: 90W OUTPUT: 15W RMS into 8Ω
INPUT IMPEDANCE: >1MΩ >1MΩ
SPEAKER: One 8Ω, 10" Fender® Special Design (P/N: 0091245000) Recommended: Super Champ SC112 speaker enclosure (P/N: 2223200000)
FUSES: F3AL, 250V for 100V/120V versions F1.6AL, 250V for 230V/240V versions F3AL, 250V for 100V/120V versions F1.6AL, 250V for 230V/240V versions
TUBES: One 12AX7 and Two 6V6 One 12AX7 and Two 6V6
FOOTSWITCH (OPTIONAL): P/N: 0071359000 (Channel select, Effects bypass) P/N: 0071359000 (Channel select, Effects bypass)
DIMENSIONS: HEIGHT: 15.0 in (38 cm) WIDTH: 17.5 in (45 cm) HEIGHT: 8.0 in (20.3 cm) WIDTH: 17.5 in (45 cm)
DEPTH: 9.2 in (23.3 cm) DEPTH: 8.5 in (21.6 cm)
WEIGHT: 24 lb (10.9 kg) 18.5 lb (8.4 kg)
Product specifications are subject to change without notice.
Your new Fender® amplifier comes equipped with the
highest quality tubes available, sourced from various
manufacturers all over the world. Because of occasional
irregularities in supply, the specific tube type used in
each amplifier is subject to change without notice.
When replacing output tubes, please note the specific
tube markings on the original tubes factory supplied
with your amplifier. For example, 6V6 output tube types
used by Fender include, but are not limited to: 6V6C; 6V6CQ; 6V6RD, etc. The
installation of a different type may require significant adjustment by a qualified
technician to avoid reduction in performance and tube life.
Additionally, Groove Tubes® tests and sorts many of our output tubes based on
their measured performance. The sorted tubes are marked with a label on the
base with coarse ratings of BLUE, WHITE, & RED plus fine ratings of 1-10. If your
amp came supplied with, for example, a pair of matched 6V6 power tubes ranked
at WHITE-6, then any pair of 6V6 power tubes marked with a course rating of
WHITE will be a good replacement. If the tube replacements are marked as
WHITE-6, they will be a perfect direct replacement.
If you have questions or concerns, contact your Fender dealer or authorized
service center.