Filter
Top Products
I n s t a l l i n g
t h e p o w e r
a m p l i f i e r
2 2
To bi-amp to two passive loudspeakers
Extremely high sound quality can be achieved using two separate
G56/G57 Two-channel Power Amplifiers, one to drive each
loudspeaker. The two channels in each G56/G57 Two-channel
Power Amplifier are used to drive the LF and HF units in each
loudspeaker.
• Switch the BRIDGE MODE switch on both amplifiers to the OFF
position.
Important: Remove the links bridging the LF and HF terminals on
the back of each loudspeaker.
• Connect the red and black terminals from the LF and HF units on
one loudspeaker to the red and black terminals on each channel
of one amplifier.
• Likewise, connect the LF and HF units from the other loudspeaker
to the red and black terminals on each channel of the other
amplifier.
• Connect the left audio output from the preamplifier to both
inputs on one amplifier.
• Connect the right audio output from the preamplifier to both
inputs on the other amplifier.
G Series Power Amplifier 22 9/5/06 12:00:05 pm