Filter
Top Products
I n s t a l l i n g
t h e p o w e r
a m p l i f i e r
2 0
To connect to passive loudspeakers
Loudspeaker
Treble
Bass/mid
Loudspeaker
Treble
Bass/mid
G56/G57
OFF
• Set the BRIDGE MODE switch to the OFF position. • Connect one of each pair of the red and black terminals from
the appropriate channel of the G56/G57 to the red and black
terminals on the loudspeakers.
To bi-wire to passive loudspeakers
Loudspeaker
Treble
Bass/mid
Loudspeaker
Treble
Bass/mid
G56/G57
OFF
• Set the BRIDGE MODE switch to the OFF position.
Important: Remove the links bridging the LF and HF terminals on
the back of each loudspeaker.
• Connect the LF red and black terminals from each loudspeaker
to the red and black terminals on the appropriate channel of the
G56/G57, using twin loudspeaker cable.
• Connect the HF red and black terminals from each loudspeaker
to the other pair of red and black terminals on the appropriate
channel of the G56/G57.
G Series Power Amplifier 20 9/5/06 12:00:03 pm