Filter
Top Products
To connect the G55 to an unbalanced preamplifier (eg G01 Control Unit)
G55 Five-channel Power Amplifier
OFF
OFF
G01 Control Unit
PRE OUT
AUDIO LEAD
AU
DIO LEAD
• Switch the BRIDGE MODE switch for channels 1/2 to the OFF
position.
• Connect the UNBALANCED sockets on the power amplifier to the
outputs from the preamplifier.
• Switch the corresponding channels to the UNBALANCED position.
You should either use a twin-screened audio cable, or a pair of
single-screened audio cables.
To connect the G55 to a balanced preamplifier (eg G02 Balanced Control Unit)
G55 Five-channel Power Amplifier
OFF
OFF
G02 Balanced Control Unit
XLR LEAD
XLR LEAD
BALANCED
MAIN OUT
• Switch the BRIDGE MODE switch for channels 1/2 to the OFF
position.
• Connect the BALANCED sockets on the power amplifier to the
balanced outputs from the preamplifier, using XLR cables.
• Switch the corresponding channels to the BALANCED position.
I n s t a l l i n g
t h e p o w e r
a m p l i f i e r
7
G Series Power Amplifier 7 9/5/06 11:59:35 am