Filter
Top Products
Full Screen and Reduced Screen Modes
The VNS104 has two screen modes: full and reduced. When decoding and viewing
PURE3 streams, you can switch between the two.
Figure 17. Select Full Screen
To switch from the reduced screen to full screen, select Fullscreen from the toolbar or
double-click anywhere on the screen.
To return to the reduced screen size, press <Esc> on the keyboard or double-click
anywhere on the screen.
When the VNS104 is in reduced screen mode, the toolbar and window borders are
visible. In full screen mode, only the decoded streams are displayed.
For both reduced screen mode and full screen mode, the size of the available viewing
area determines the scaling of the decoded stream.
VNS104 Display Format and Scaling Modes
The VNS104 has no capability to modify or change the streams, stream format, screen
layout, stream content, or window selection. All stream formatting and window layout
selection is done from the VN-Matrix Enterprise Controller. Individual stream selection
and conguration is also set by the controller. The VNS104 can be congured by the
controller to run in either quad (4) or single (1) stream display layout.
When a stream is assigned by the Enterprise Controller, the decoded image is displayed
in the decoder window in the format assigned by the controller. When a stream is
assigned but not available, a black screen is displayed. If a splash screen is enabled, it is
displayed instead.
15VNS104 Multi‑Stream Decoder • Operation