Extron electronic VNS 104 Stereo Receiver User Manual


  Open as PDF
of 25
 
Application Configuration
To start the VNS104 decoder each time someone logs on to the host computer, select
the Auto Start Application box (see gure 13).
Figure 13. Application Configuration
If you want a customized splash screen as the software background and the background
presented in a viewing window when no streaming media is assigned or available, a
bitmap (*.bmp) image of any size may be used.
Click the User Dened Splash box. The Splash Image File: eld activates. Browse
to locate and select the custom picture le. The image is resized by the program. The
next time the program is started, the new splash image is used.
Once these nal options are selected, click OK. The VNS104 software is ready to use.
Reconfiguring the VNS104 Software
If the VNS104 conguration needs to be changed, select the Congure menu from the
toolbar (see gure 14).
Figure 14. Toolbar - Configure
Selecting Congure accesses the same conguration dialog box as the initial installation
conguration (see VNS104 Configuration Dialog Box on page9). Enter new values
as required.
When the conguration is complete, the VNS104 software is ready to use.
NOTE: If network configuration or device configuration values are changed, the
VNS104 must be restarted for those changes to take effect.
VNS104 Multi‑Stream Decoder • Conguration 12
 previous next