Filter
Top Products
Network Configuration
The VN-Matrix Enterprise Controller IP address and port number are entered in the rst
two elds (see gure12).
Figure 12. Controller IP Address and Port, Local IP Address and Port
Controller IP Address: The Controller IP Address is the IP address of the VN-Matrix
Enterprise Controller that the VNS104 connects to.
Controller Port: The Controller Port number shown in gure 12 (5432) is used by all
VN-Matrix devices to communicate with the Enterprise controller. The value is only
changed if the Enterprise Controller is congured to accept communications on a
different port number. Under normal circumstances the setting should remain at the
default setting (5432).
Local IP Address: The IP Address of the PC the VNS104 is installed on. If the PC
has more than one network interface (NIC), select the required IP address from the
drop-down box.
Local Port: The Local Port is a read only value set by the VNS104 application during
installation.
Defaults: The Defaults button restores the Controller Port and Local Port values to
their defaults (shown in gure 12 above).
VNS104 Multi‑Stream Decoder • Conguration 11