Filter
Top Products
SM 26 Surface Mount Speaker • Introduction 1
Introduction
This section gives an overview of the Extron SM 26 SpeedMount Surface Mount Speaker.
Topics include:
• About this Guide
• About the SM 26 Surface Mount Speaker
• Features
• Application Diagram
About this Guide
This guide describes the Extron SM 26 surface mount speaker and discusses how to
install, configure, and operate it.
In this guide, the terms “SM 26” and “speaker” refer to the SM 26 surface mount speaker.
About the SM 26 Surface Mount Speaker
The SM 26 speaker is a surface-mount speaker system that features a 6.5-inch woofer
and a one-inch tweeter with very wide audio dispersion. Speaker mounting incorporates
a separate mounting plate that can be attached directly to a wall. The speaker wiring
attaches to the mounting plate so that the speaker can easily slide into the mounting
plate, making electrical contact between the plate and the contacts on the speaker. A
built-in locking mechanism between the speaker and the mounting plate also prevents
the speaker from being removed by unauthorized personnel. The speaker may be easily
removed by depressing a hidden release mechanism that does not require tools.
Features
• Mounting options —
• Flat (0°) mounting plate
• Angled (10°) mounting adapter
• Yoke mount kit (optional)
• Available in two versions —
• SM 26: with 8-ohm input
• SM 26T: with internal transformer and 8-ohm/70V/100V tap selector switch
• 6.5-inch woofer with 1-inch tweeter — Full range with a wide audio dispersion.
• Dual tuned bass-reflex ports
• Rated power — 60 W continuous pink noise (per IEC 60268-5); 120 W continuous
program.
• Frequency response — 70 Hz to 20 kHz, -10 dB (half space)