Filter
Top Products
SM 26 Surface Mount Speaker • Installation 10
Attaching the Speaker to the Mounting Plate
ATTENTION: By default, the SM 26 speaker is shipped unlocked. When mounting
the speaker to the mounting plate, be sure that the speaker is unlocked. Failure to
place the speaker in the unlocked position will result in damage to the speaker lock
mechanism should an attempt be made to mount a locked speaker (see “Using
the Security Key to Lock and Unlock the Speaker” on page 12).
NOTE: If the secondary attachment point is being used, see the “Attaching a
Secondary Support Cable” on page 9 for installation details before proceeding
further.
Position the rear mounting slot of the speaker above the catch tab of the mounting plate,
then slide the speaker down into the mounting plate until a click is heard indicating that
the speaker is secured in place (see figure below). When properly seated, the speaker
connections are automatically made.
Catch Tab
Figure 13. Attaching the Speaker to the Mounting Plate