Filter
Top Products
Reference
Information
This section discusses the specifications, part numbers, and accessories for the DVI-RGB 200.
Topics that are covered, include:
• Specifications
• Part Numbers
• Mounting the Interface
Specifications
Video
NOTES:• The DVI-RGB 200 converts a single link DVI signal to an analog RGB signal.
•Using an adaptor (the Extron HDMI to DVI-D adapter, part #26-616-01), the DVI-RGB 200 can accept
HDMI signals. It converts HDMI digital RGB signals, but does not support the HDMI digital component
(YCrCb) signal format.
Resolution range ............................ Up to 1920x1200 or 1080p @ 60 Hz
Formats .......................................... RGB
EDID ............................................... Supports emulation of custom or factory preset Extended Display Identification Data (EDID)
tables
Standards ....................................... DVI 1.0
Video input and loop through
Number/signal type ........................ 1 single link DVI-D digital video input
1 single link DVI-D buffered loop-through
Connectors .................................... 1 female DVI-I (DVI input)
1 female DVI-I (DVI loop through)
Video output
Number/signal type ........................ 1 RGBHV, RGBS, RGsB
Connectors .................................... 6 female BNC
Nominal level ................................. 0.7 Vp-p for RGB
Level adjustment range .................. 0 dB to 6 dB (x1 to x2)
Peaking adjustment range .............. 0 dB to 6 dB (x1 to x2) at 100 MHz
Impedance ..................................... 75 ohms
Output resolution ........................... Follows input, determined by the local DVI loop-through monitor or by the selector on this
product.
Return loss ..................................... -35 dB @ 5 MHz
DC offset ....................................... ±5 mV maximum with input at 0 offset
Output cable driving distance ......... 150’ (45 m) at 1600 x 1200 with Extron MHR cable
250’ (60 m) at 1024 x 768 with Extron MHR cable
7DVI-RGB 200 • Reference Information