Filter
Top Products
38
Output Trigger
This function enables you to turn the two 12 Volt output triggers (24) on or off, or
configure them with independent delays of up to 20 seconds. The options are:
ON,
OFF, DELAY.
Enter the menu, then:
1. Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
OUTPUT TRIGGER.
2. Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control
. The display (3) shows the default mode: TRIGGER 1.
3. Press the enter button or key again. The display shows the default mode: OFF.
4. Use the level control knob or up and down keys to select: OFF, ON, or DELAY.
5. Select DELAY. You are prompted to enter a delay time of 0-20 seconds.
6. Enter the delay time.
7. Press enter to confirm the selection. The display reads: DELAY.
8. Use the level control knob or up and down keys to scr
oll to:
BACK.
9. Press the enter button or key to return to: TRIGGER 1.
10. Use the level control knob or the up and down keys to scroll to: TRIGGER 2.
11. Repeat Steps 3-7 to set Trigger 2.
ON
The 12 Volt trigger output is enabled at power on for the selected trigger (Trigger 1
or 2).
OFF
The 12 Volt trigger output is disabled at power on for the selected trigger (Trigger
1 or 2).
DELA
Y
The 12 volt trigger output is enabled at power on for the selected trigger (Trigger 1
or 2), and the delayed for a period of time (0-20 seconds).
(SECTION SEVEN: Customizing the Evolution 222 continued)
5 Menu Button or Key
Enter or exit the menu.
14 Volume Knob
or Level Keys
Navigate the menu hierarchy;
review functions and configu-
ration options.
6
Enter Button or Key
Select a configuration option;
confirm a selection.
BACK
Scroll backwards through the
menu hierarchy; exit a menu
option without confirming it.