Filter
Top Products
PAGE 33
FireBall™ AVX & MX Series User’s Manual
EXTERNAL CHANGER CONNECTIONS
There are a few general rules to follow when connecting changers to
your FireBall...
Changer Types
• Sony DVP-CX777ES DVD/CD (DVDs and CDs ONLY)
• Sony 200, 300, 400 disc CDP Series CD changers (CDs ONLY)
Note: Sony CD and DVD/CD changers can not be mixed
Different models of Sony CD changers may be mixed
Control Connections
• Changer 1 should be connected to COM port 1
• Changer 2 should be connected to COM port 2
• Etc.
Note: Do NOT connect any S-Link cables from the FireBall to the
Sony 777ES changers.
Digital Audio Connections
• Changer 1 should be connected to Optical Digital in 1
• Changer 2 should be connected to Optical Digital in 2
• Etc.
Analog Audio Connections
• Changer 1 should be connected to Analog Audio in 1
• Changer 2 should be connected to Analog Audio in 2
• Etc.
Sony DVD/CD Changer Hookup
• Sony DVP-CX777ES 400 disc changers must be connected via
individual RS-232 cables (not S-Link cables).
• An RS-232 cable is standard a DB9 null modem cable (not
included with the changer)
• The analog audio connection is required when recording from
external changers
• Set each changer to address Command Mode 1.