Filter
Top Products
PAGE 28
FireBall™ AVX & MX Series User’s Manual
MULTI-ZONE VIDEO OUTPUTS
Mulit-Zone FireBalls have several video output formats and connectors including:
Main Zone
• Component Video
• S-Video
• Composite Video
Remote Zone (connects to an MP-200)
• Component Video
• S-Video
• Composite Video
All video outputs are active at the same time, so
you can use as many as you like without causing
signal degradation. However, the corresponding
video input from the changer must also be
connected to watch a movie from the changer on
that video output.
The Component Video output will provide the
best possible video quality for the FireBall User
Interface, but will require that your video system
has an available component input.
The S-Video output is typically used for the
optional Escient ETP-1500 touch panel to provide
the user interface directly on the touch panel.
The composite output is typically used for an a/v
distribution system, such as the Xantech AV-61 or
the Niles ZR-4630/8630 distribution systems.
5 CHANGER BACK PANEL