Filter
Top Products
PAGE 29
FireBall™ AVX & MX Series User’s Manual
SINGLE-ZONE VIDEO OUTPUTS
Single-Zone FireBalls have several video output formats and
connectors including:
• Component Video
• S-Video
• Composite Video
All video outputs are active at the same time, so you can
use as many as you like without causing signal degradation.
However, the corresponding video input from the changer must
also be connected to watch a movie from the changer on that
video output.
The Component Video output will provide the best possible
video quality for the FireBall User Interface, but will require
that your video system has an available component input.
The S-Video output is typically used for the optional Escient
ETP-1500 touch panel to provide the user interface directly on
the touch panel.
The composite output is typically used for an a/v distribution
system, such as the Xantech AV-61 or the Niles ZR-4630/8630
distribution systems.
3 CHANGER BACK PANEL
1 CHANGER BACK PANEL