Installing the Equipment
Warning!
The Technical Earth is not a Protective earth for electric shock protection.
This unit must be correctly earthed through the molded plug supplied. If the local
mains supply does not have an earth conductor do not connect the unit. Contact
Customer Services for advice.
Before connecting the unit to the supply, check the supply requirements in Annex B
of the Reference Guide.
2.4 Rear Panel Connectors
Always use the specified cables supplied for signal integrity and compliance with
EMC requirements (see the Reference Guide).
Note: Rear panel connectors may differ, depending on the options selected.
ETHERNET 1-2
TECHNICAL
EARTH
ASI OUT 1-2
CVBS
A
LARMASI INPUT
AC POWER
RF IN 1-4
AUDIO OUT (1)
1-2
IP OUT 1-2
Figure 1 Rear Panel Connectors (RX8310/BAS with RX83XX/HWO/IP/OUT)
ETHERNET 1-2
TECHNICAL
EARTH
ASI OUT 1-2
CVBS
A
LARMASI INPUT
AC POWER
RF IN 1-4
AUDIO OUT (1)
1-2
IP OUT 1-2
CA
INTERFACE
Figure 2 Rear Panel Connectors (RX8315/BAS with RX83XX/HWO/IP/OUT)
EN/LZT 790 0008/1 R1A 2011-03-30
9 (40)