Filter
Top Products
Front Panel Control
4.4.1 Menu Structure
The Front Panel menus and sub-menus, available on the LCD, provide the
configuration parameters that may be viewed, selected and/or modified.
• System - Provides sub-menus for viewing/configuring the receiver hardware
and access parameters.
- Network – Enables the input and display of the addresses required to
communicate with the receiver. Access to the receiver Status page is also
available from this sub-menu.
- Build - Provides version and ID numbers for the hardware and software
products installed in the receiver. Also provides options for rebooting the
receiver and deactivating the Front Panel controls.
- Unit Serial Number - Displays the unit serial number.
- Factor - Provides receiver rebooting options.
- FP (Front Panel) – Enables viewing/configuring of the Front Panel lockout
facility, which allows the Front Panel controls to be deactivated.
• Input - Provides sub-menus for viewing/configuring the Input Card (Satellite
Input Card) parameters.
- Select/Primary Input - Enables the selection of the primary input for the
receiver.
- Select Satellite Input – Enables viewing and editing of the configuration
parameters for the Satellite Input Card, if fitted.
• Service – Provides sub-menus for viewing/configuring the currently selected
service for decode from the input feed.
- Decode Service - Enables selection of the required decode service.
- Video – Enables selection of video services, such as the video component,
etc.
- Audio - Enables selection of audio services, such as the channel, etc.
• CA Systems – Provides sub-menus for viewing/configuring Conditional Access
parameters that restrict and control access to the receiver and select the service
for decryption from the incoming feed.
- Service Table – Displays a summary of the CA features and the service ID
number.
- Director – Enables configuration of Director Conditional Access parameters,
such as: ID numbers, download status and the facility to reset or change the
PIN number.
• Output Menu - Provides sub-menus for viewing/configuring the receiver output
parameters.
- Output Selection - Enables selection of the required output type.
EN/LZT 790 0008/1 R1A 2011-03-30
19 (40)