Filter
Top Products
– ‘Use IP header compression’optional.
– ‘Use default gateway on remote network’
turned on.
7) Press ‘OK’ and go to the ‘Security’ tab. Select
‘Accept any authentication including clear text’.
8) Click ‘OK’ all the way to update the configuration.
You have now installed the GPRS connection. To
connect to the GPRS network, follow steps 1 to 3:
1) Go to ‘My Computer -> Dial-Up Networking’ and
select the Dial-Up Networking connection
previously configured. Verify that the telephone
number is *98#. Then press ‘Dial’.
Annex: PC data configurations 47