Ericsson F221m Stereo System User Manual


 
Note: if instead of hearing beeps you hear a deep
tone, this means that there has been an error in the
activation or deactivation.
More than one call (call wait, call hold,
call transfer, multiparty call)
You can handle more than one call simultaneously.
For example, you can put an ongoing call on hold,
while you make or answer a second call, and then
switch between the two calls.
You can also set up a conference call to have a joint
conversation with up to four people.
Call waiting service
If you wish to be able to receive a second call while
another call is in progress, you must turn on the call
waiting service.
Note: if you are engaged in a fax or a data call, any
other incoming calls are rejected.
Warning!: these dialing sequences may vary
depending on your network operator. If these do not
work, please consult your network operator or check
the user guide provided with your subscription.
To manage
Call waiting Dial… You will hear…
Function…
Activate *43# 1 beep
Deactivate #43# 3 beeps
Check status *#43#
1 beep if activated
3 beeps if deactivated
Note: if instead of hearing beeps you hear a deep
tone, this means that there has been an error in the
activation or deactivation.
Making a second call
You can only put one call on hold while you make a
second call.
To hold the active call: press the R key on your
telephone and proceed to make the second call.
To switch between the two calls, press R2.
To finish the active call and return to the held call,
press R1.
Receiving a second call
If the call waiting service is on, you hear a tone in
the telephone when you receive a second call.
26 Advanced features