Filter
Top Products
Power light Status light Lamp Temp light Filter light Status and solution
lights
Off Flashing Off Flashing Off Fan or sensor error. Projector has
blue orange overheated and turned off. Leave
it turned off to cool down for five
minutes.
• Make sure that the vents and
air filter are not clogged with
dust or obstructed by nearby
objects.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug
the projector and contact Epson
for help.
Off Flashing Orange Off Off The indicated lamp has a
blue problem.
• Check to see if a lamp is
burned out, broken, or installed
incorrectly. Reseat or replace
the lamp as necessary.
• Make sure that the vents and
air filter are not clogged with
dust or obstructed by nearby
objects.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• Make sure that the Direction
setting is correct.
• If the problem persists, unplug
the projector and contact Epson
for help.
201