Filter
Top Products
5. When you are finished, press the Menu button.
Note: If your resulting images contain noise, turn off the Frame Interpolation setting.
Parent topic: Adjusting Projector Features
Viewing 3D Images
Using an optional polarizer kit (ELPPL01), passive 3D glasses (ELPGS02A/ELPGS02B), and two
installation frames (ELPMB44), you can use two projectors to project and view passive 3D images. See
the instructions supplied with the optional equipment for setup and use.
For optimal viewing, select the 3D Setup setting from the Signal menu and select one of the 3D color
modes in the 3D Images menu.
Parent topic: Adjusting Projector Features
Related concepts
Color Mode
Related references
Input Signal Settings - Signal Menu
Optional Equipment and Replacement Parts
Saving Settings to Memory and Using Saved Settings
You can save customized settings for each of your video inputs and then select the saved settings
whenever you want to use them.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Settings menu and press Enter.
4. Select the Memory setting and press Enter.
152