Filter
Top Products
Setting Up Wireless Network Security
You can set up security for your projector to use on the wireless network. Set up one of the following
security options to match the settings used on your network:
• WPA/WPA2-PSK security (Advanced connection mode)
• WPA2-PSK security (Advanced and Quick connection mode)
Note: To use wireless network security in Quick connection mode, you must enable SSID Auto Setting.
Check with your network administrator for guidance on entering the correct information.
1. Press the Menu button.
2. Select the Network menu and press Enter.
3. Select Network Configuration and press Enter.
4. Select the Security menu and press Enter.
5. Select the security settings for your network.
Note: TKIP and AES encryption are supported. WPA authentication via an authentication server is
not supported.
6. When you finish selecting settings, select Complete and follow the on-screen instructions to save
your settings and exit the menus.
53