Epson 5020UBE Home Theater System User Manual


 
24 Setting Up the Projector
3. Press the On button on the remote control or the Ppower button on the projector.
Note: To prevent children from turning on the projector, you can use the Child Lock feature. See
page 37 for details.
If you’ll be using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude
Mode so the fan can properly cool the projector at the high altitude air pressure. See page 57 for
details.
The power light flashes while the projector warms up. If you don’t see a picture, you may
need to change the image source as described on page 24.
Turning Off the Projector
1. Turn off any equipment connected to the projector.
2. Press the Ppower button on the projector twice or press the
Standby button on the
remote control and wait for the power light to stop flashing.
3. Turn off the power switch on the back of the projector.
Caution: Turn off this product when not in use to prolong the life of the projector.
Selecting the Image Source
The source buttons on the projector and remote control let you switch between images from
different pieces of equipment connected to the projector (such as a Blu-ray Disc/DVD player,
cable or satellite box, or video game console).
Press the
Source button on the remote control that corresponds to the port to which your
video source is connected.
Remote control Projector