Filter
Top Products
30
RESET Button
If the unit does not respond to commands from the remote control or from the front
panel controls, the internal processor may be “locked” and must be reset. Use a
paper clip or similar object to press the RESET button which is located inside a
pin-hole behind the back panel.
Depress the RESET button for a few seconds to clear the memory and restore
normal operation.
Notes:
1.) The system must be connected to an AC outlet in order to reset the internal
processor.
2.) After clearing the memory you must re-enter all of your favorite stations in
the Tuner Preset Memories.
RESET Pin Hole
PHONES Jack
The Stereo Headphone Jack is located on the left front panel. Connect a set of
stereo headphones (not included) to this jack for private listening without disturbing
others. The speakers are automatically disconnected when headphones are
connected to the headphone jack.
IMPORTANT: When using headphones always set the volume control to a low
level before you put the headphones on. Then put the headphones on and
gradually increase the volume to a comfortable listening level.
MS9933TT_050304.p65 3/5/2004, 10:2530