Filter
Top Products
18
PROGRAMMED CD PLAYBACK
You can program the CD changer to play up to a total of 40 tracks on all 5 discs in
any desired order.
NOTE: You can not program the CD changer during playback. If a disc is playing
press the STOP button first and then follow the instructions.
Entering A Program
1.) Press the MEMORY button once. The
MEMORY, the track number indicators will
flash in the display. Program number P-01
appears.
2.) Press the CD/DISC SKIP button or one of
the five disc buttons to select the disc which
contains the first track you wish to program.
Example: Disc 2.
3.) Press the or SKIP buttons to selectct
the first track you wish to program.
Example: Track 08.
4.) Press the MEMORY button again to store
the desired disc and track number into
memory location Number 1. The display will
change from Program Number P-01 to
Program Number P-02.
5.) Use the CD/DISC SKIP button or one of the
five disc buttons to select the disc containing
the next track you wish to program.
Example: Disc 3.
MS9933TT_050304.p65 3/5/2004, 10:2518