Filter
Top Products
23
CASSETTE OPERATION
This Emerson Audio System features a dual cassette mechanism which
allows you to play pre-recorded cassette tapes in either DECK A or DECK
B. You may also load tapes in both decks for continuous automatic playback
of two cassettes.
You may make tape recordings directly from the stereo receiver, the CD
changer, the Turntable, or external source connected to the AUX INPUT
jacks, or even from Tape to Tape (Dubbing) at either normal or high speed.
The built in ALC (Automatic Level Control) system adjusts the volume for
distortion-free recordings. You can change the playback volume control
settings during recordings without effecting the volume of the final recording.
For best results always use good quality blank tapes for recording. Although
blank tapes are available with various recording times we recommend that
you do not use tapes longer than C-90 which contain 90 minutes of recording
time (45 minutes per side). Longer tapes such as C-120’s (60 minutes per
side) use thinner material which may eventually stretch and can become
tangled in the mechanism.
Keep the critical parts of the tape mechanisms clean to insure trouble free
operation.
Refer to the cleaning instructions in the CARE AND MAINTENANCE section
of this manual.
MS9933TT_050304.p65 3/5/2004, 10:2523