Filter
Top Products
31
Programmed Playback
The Programmed Playback feature allows you to program a total of up to 20 tracks
from a selected disc for playback in any desired order. You may program the same
track to play several times within a program sequence if desired.
NOTE: You cannot program tracks during playback. If a disc is playing press
the STOP or /BAND button first to stop playback before beginning the
programming steps below.
1.) Press any of the CD 1, CD 2, or CD 3 button to select the disc you want to
program and wait until the player has read the Table of Contents.
2.) Press the PROGRAM button on front panel or MEMO(PROG) button on remote
control once.
The Track “00” flashes and MEMORY
indicator, Program Memory “P01” appear.
3.) Press or buttons to select the first
track on the disc to be programmed.
(Example: Track 07).
4.) Press the PROGRAM button on front panel
or MEMO(PROG) button on remote control
again. The Program Memory number
advances to “P02”.
5.) Repeat steps 3 and 4 selecting the desired Track number each time until you
have entered up to 20 tracks in the CD program memory.
6.) Press the PLAY/PAUSE button to begin programmed playback.
The MEMORY indicator remains. The
player will play the track that you
programmed in the desired sequence.
MS3111M_112306.p65 23/11/2006, 10:4431