Filter
Top Products
24
Presetting Stations In The Tuner Memory
You can store up to 20 of your favorite stations, 10 FM and 10 AM in the tuner
memory for easy recall at any time.
Using either the manual or automatic tuning method described on previous page,
tune to the first station you wish to memorize (Example: FM 103.5 MHz) and then:
1.) Press the MEMORY(CLK. ADJ.) button on front panel or MEMO(PROG) button
on remote control once.
The display shows preset memory “1” and
the MEMORY indicator appear.
2.) Press the MEMORY(CLK. ADJ.) button on front panel or MEMO(PROG) button
on remote control again to enter your station into preset memory “1”.
The MEMORY indicator disappears but the
Preset Memory # “1” remains in the display,
confirming that your station has been
entered in Preset Memory #1.
3.) Tune to the next station you wish to memorize (Example: FM 106.7 MHz).
Press the MEMORY(CLK. ADJ.) button on front panel or MEMO(PROG) button
on remote control.
Press the MEMORY UP Button on front
panel or M-UP(FOLDER+) button on
remote control to select the next Preset
Memory #2.
Press the MEMORY(CLK. ADJ.) button on front panel or MEMO(PROG) button
on remote control again to enter your station in Preset Memory #2.
4.) Repeat Step 3, selecting a different Preset Memory # each time, until you have
stored up to 10 stations on the FM band, then press the BAND button on front
panel or (Stop)/BAND button on remote control to switch to the AM band,
and follow the same procedure to enter up to 10 AM station in the tuner memory.
MS3111M_112306.p65 23/11/2006, 10:4424